top of page
Sirius Solutions Global website header with navigation menu: Home, Services, Specialties, Our Expertise, Resources, and Contact Us.
"Sirius Solutions Global Logo"

New Medicare Advance Care Planning Codes for 2027: Can Clinical Staff Bill G0572 and G0573?

7 hours ago
6 min read
Sirius Solutions Global banner about Medicare advance care planning codes 2027, with doctor and nurse reviewing a clipboard.

Quick answer: can clinical staff bill G0572 and G0573?

Not on their own. Clinical staff can furnish qualifying advance care planning (ACP) under direct supervision, but the billing physician or other practitioner reports the service. Effective January 1, 2027.

 

For years, practices that used a nurse or social worker for ACP conversations had no clean way to report that time, and many folded it into 99497. In the Medicare advance care planning codes for 2027, CMS separates the two: new HCPCS codes G0572 and G0573 cover clinical staff time, while 99497 and 99498 are reserved for time the billing practitioner personally spends.

That split changes templates, time tracking, and charge capture before January 1. This guide uses the final rule as its source, flags what we could not verify, and gives billing teams a practical preparation plan.

What Changed in Medicare Advance Care Planning Billing for 2027?

 

Before 2027

2027 (final rule)

Codes

CPT 99497 and +99498

G0572 and +G0573 for clinical staff time; 99497 and +99498 for practitioner time

Staff participation

No dedicated Medicare path for staff time

Staff time reported with G0572 and G0573 under direct supervision

Time attribution

Often blended

Staff and practitioner time must be separated

Effective

Current

January 1, 2027

Source: CMS’s final rule fact sheet and the Federal Register final rule. CMS finalized G0572 (formerly the proposed placeholder GACP1) and G0573 (formerly GACP2).

What Are HCPCS G0572 and G0573?

Coding element

G0572

G0573

Purpose

Initial ACP service, including explanation and discussion of advance directives and completion of forms when performed

Additional ACP time

Time

First 20 minutes of clinical staff time

Each additional 20 minutes (confirm the exact descriptor and minimum time)

Code type

Primary service code

Add-on code

Provider of the time

Qualifying clinical staff, with the patient, family members, or surrogate

Qualifying clinical staff

Supervision

Direct supervision of the billing practitioner

Direct supervision of the billing practitioner

The final rule states that G0573 can be reported once the full 20 minutes of clinical staff time, or clinical staff time plus practitioner time, has been spent under G0572. Because that wording affects how time is counted, confirm the final descriptors and the reporting instructions in the CMS files.

Can Clinical Staff Bill G0572 and G0573?

Step

Who is responsible

Performing the service

Qualifying clinical staff under direct supervision

Documenting the service

Clinical staff, with practitioner involvement as your policy requires

Supervising the service

The billing physician or other practitioner

Reporting on a Medicare claim

The billing physician or other practitioner, not the staff member

Receiving payment

The billing practitioner or group

Not every employee qualifies as clinical staff. CPT’s general definition describes staff who work under a practitioner’s supervision and are permitted to perform the service, per CMS’s care management FAQ on the same concept. Whether other requirements, such as employment, apply to these codes is not something we could confirm, so review the final rule and your MAC before reporting.

G0572 and G0573 vs. CPT 99497 and 99498

Two side-by-side billing info cards: teal Clinical staff time and blue Billing practitioner time, listing codes, minutes, and who reports it.

Feature

G0572

G0573

99497

99498

Service

ACP

Additional ACP

ACP

Additional ACP

Time

Initial 20 minutes

Additional 20 minutes

Initial 30 minutes

Additional 30 minutes

Time attributed to

Clinical staff

Clinical staff

Billing practitioner

Billing practitioner

Structure

Primary

Add-on

Primary

Add-on

The codes separate who furnished the time. Do not report the same minutes under more than one code. Whether and how the G-codes and CPT codes can be reported on the same date is a detail to verify in current CMS and CPT instructions, since our sources conflict.

What Documentation Is Required?

Below is an illustrative checklist, not a complete regulatory list. CMS’s explicit requirements are the final descriptors and time rules. The rest are recommended practices.

☐ Patient identification and date of service

☐ Purpose of the ACP discussion

☐ Patient participation

☐ Family member or surrogate involvement, when applicable

☐ Discussion of advance directives and forms, if completed

☐ Clinical staff member’s name and role

☐ Actual qualifying time spent, with start and stop times or another reliable method

☐ Supervising and billing practitioner

☐ Where practitioner time is also reported, separate documentation of that time

Direct Supervision Requirements for Clinical Staff

CMS finalized these codes for services furnished under the direct supervision of the billing practitioner. Do not assume that general availability, a standing order, or remote presence meets that standard. Whether virtual direct supervision or telehealth flexibilities apply to these codes in 2027 is not something we verified, so check CMS’s supervision definitions and your MAC. Document who supervised, and how, in your workflow.

Common G0572 and G0573 Billing Mistakes

Potential billing issue

Why it matters

Recommended prevention

Reporting staff time under 99497

Incorrect time attribution

Separate practitioner and staff time

Missing supervision documentation

Compliance concerns

Document supervision

Incorrect time calculation

Wrong code selection

Review actual qualifying time

Reporting additional units incorrectly

Possible overbilling

Validate add-on requirements

Duplicate time reporting

Duplicate billing risk

Keep separate time records

Incomplete ACP notes

Insufficient support

Use structured templates

Wrong staff eligibility assumptions

Inappropriate reporting

Verify applicable staff rules

How Should Medical Practices Prepare for January 1, 2027?

☐ Review existing ACP workflows

☐ Identify practitioner-performed vs. staff-performed services

☐ Review clinical staff eligibility

☐ Establish supervision workflows

☐ Update EHR documentation templates

☐ Update billing software and code libraries

☐ Train coding and billing staff

☐ Set up separate time tracking

☐ Check MAC and payer guidance

☐ Audit initial claims after implementation

Example: A Clinical Staff ACP Workflow (Hypothetical)

Seven-step flowchart: ACP discussion, clinical staff service, time documented, direct supervision, review, claim submission, payment monitoring.

A nurse in a primary care office meets with a patient and her daughter to discuss advance directives, records start and stop times, and the supervising practitioner is immediately available in the office. The practitioner reviews the note, and the billing team reports the nurse’s time with G0572 and, if time rules are met, G0573. If the practitioner also spends separate time, that time is documented separately for 99497. No dollar amounts are shown. Actual reporting must follow the final descriptors and time rules.

How These Changes Affect Medical Billing and RCM

The split touches charge capture, documentation, code assignment, claim review, training, audits, and denial prevention. Billing teams must tell practitioner-performed ACP from staff-performed ACP, since reporting staff time under practitioner codes could create an overpayment risk. Sirius Solutions Global offers medical billing, coding, eligibility verification, denial management, prior authorization support, credentialing, billing audits, and RCM, using AI-assisted, human-verified workflows. We do not provide legal advice, claim CMS endorsement, or guarantee Medicare compliance.

Knowledge Check

Question

Answer

1. What is the initial time increment for G0572?

20 minutes of clinical staff time

2. What is the purpose of G0573?

An add-on for additional clinical staff ACP time

3. Main distinction between G0572/G0573 and 99497/99498?

Who furnished the time: clinical staff vs. the billing practitioner

Is Your Practice Ready?

☐ Updated billing workflows

☐ Trained staff

☐ Updated documentation templates

☐ Established time tracking

☐ Reviewed supervision procedures

☐ Updated code library

Checked: ____ of 6. 0–2: start with templates and training. 3–4: close the gaps. 5–6: audit early claims. Educational only, with no compliance guarantee.

Frequently Asked Questions

▸ What are the new Medicare ACP codes for 2027?

HCPCS G0572 and add-on G0573 for clinical staff time, alongside CPT 99497 and 99498 for practitioner time.

▸ What is HCPCS code G0572?

ACP including explanation and discussion of advance directives, for the first 20 minutes of clinical staff time, under direct supervision.

▸ What is HCPCS code G0573?

An add-on for additional clinical staff ACP time, in 20-minute increments.

▸ Can clinical staff bill G0572 and G0573?

No. Staff furnish the service, and the billing practitioner reports it.

▸ What is the difference between G0572 and 99497?

G0572 is clinical staff time (first 20 minutes). 99497 is practitioner time (first 30 minutes).

▸ Can G0572 and G0573 be reported together?

G0573 is an add-on to G0572 once the time requirement is met. Confirm the exact rules in CMS files.

▸ What are the supervision requirements?

Direct supervision by the billing practitioner. Check CMS for how that is defined for 2027.

▸ What documentation is needed?

Participants, content, who furnished the time, actual minutes, and supervision, per the checklist above.

▸ When do the codes take effect?

January 1, 2027.

▸ How should practices prepare?

Separate staff and practitioner time in templates, train staff, update code libraries, and audit early claims.

Editorial note: Medicare coding and payment policies change. Verify the final descriptors, time rules, supervision requirements, and claim instructions in current CMS files and with your MAC before billing. Technical content like this benefits from review by a certified coder.

Disclaimer: This article is educational, published by Sirius Solutions Global, and is not legal, coding, or compliance advice. CPT® is a registered trademark of the AMA. Sirius Solutions Global is not affiliated with CMS. Nothing here guarantees coverage, reimbursement, or compliance.

bottom of page